There was a piece of the bridge deck
extending out part way. I wanted something to hide my steering
gear under so instead of chopping off, I added to it.
Everything is fastened together here and
The first step was taping the triangle
panel nearest you, to the deck at bottom of photo, matching it's
angle! Then I brought it down to fasten to th erest. The preserves
the fair camber. The strips of foam laying about were glued on
either side of the trimmed edge as seen next photo
Now glue another strip on the facing
Sand the foam edge smooth and tape the lot,
making it heavy on the facing side as it will get bumped around
by the dinghy.