The Barebones project, See the log menu below  Not all of these steps are recorded in the order they actually occured but hopefully makes more sense to view. Many parts have been updated.  Just uploaded - November, 2015 Parts 33-36  Back to Home Page Part 1-Gluing the panels together   Part 2-The first steps in assembling a hull  Part 3- Bulkheads and turning one hull and other stuff. Much progress!   Click here for latest photo of the project  Part 4- Hard lessons learned and a new trick   Part 5-flipping the port hull   Part 6-Bogging and outgassing  The temporary shelter  Part 7-Outgassing from the core?? The answer! Part 8, Moving the Hulls to a New Home    Part 9, help from my friends.. Boat building and health and injury Part 10, flip em and join em!  Part 11, The bridge deck Part 12, taping in voids  Project Delayed!  Part 13, Foreward Lockers and first ply Bulkheads  Part 14, Making main bulkheads of ply  Part 15, Installing the main bulkhead and more.. this is a big one!  Project continues  Part 16, composite chainplates  Part 17, The Forebeam  Part 18, Laminating with Vinylester resin   Some Cool Tools! Part 19, Decks! Part 20, Cabin Bulkhead and Cockpit Part 21, taping that long sheer  How to make a "split sander" Part 22, Designing and building cabin sides Part 23, installing furniture!  Part 24, foredeck lockers and mast deck  Part 25, Aft Decks and Voids  Part 26, shaping the rudders  Part 27, Kick up rudder cassettes    Part 28, Dagger Boards!  Part 29, Dagger Board Cases Part 30 Decoring for hatches    Part 31 Back beam  Part 32 Nightmare! ATL strikes again, defective products  Part 33 Motor pods    Part 34 Mounting the board cases  Part 35 Duckboard  Part 36 The cabin top